Gastroback 40965 Design Food Processor Advanced User Manual

Page 10

Variable slicing blade (picture H, I and J)
It allows foods to be sliced to a variety of thickness, from 0 mm -
7 mm. To adjust the blade you have to turn the shaft which is located
on the bottom side of the disc.
For thinner slices turn the shaft counterclockwise (picture I) and for thick-
er slices turn the shaft clockwise (picture J).
Note: There are two holes in the disc to ease disassembling. Put your
fingers through the holes and slightly pull the disc upwards to remove
it. Pay attention not to cut yourself.
Universal ‘s’ blade (picture K)
For cutting vegetables, fish or meat, kneading batter or making
shakes, soups or ice cream use the universal ‘s’ blade.
Warning: Use caution, as blades are sharp. Always

handle the processing blade by its central plastic section.
Fit the universal 's' blade onto the spindle and press firmly into place.
Ensure the blade is securely locked on the spindle. The blade is correct
assembled if the central plastic section faces upwards and flushes with
the wider part of the spindle. The blade is placed a few millimetres
above the bottom of the processing bowl.
5. Position the lid onto the processing bowl (picture L). You will
notice a solid grey arrow to the left of the holding lip on the lid,
when placing the lid onto the bowl this arrow needs to align with
the solid grey arrow on the handle of the bowl (picture M). To
lock, turn the lid clockwise.
The lid has four guiding pins which have to fit into the cannelure
of the processing bowl (picture N) in order to lock the lid. Turn
the lid clockwise and push up against. The lid is securely locked
in position if the arrow on the handle is facing the line on the lid.
Note: If the processing bowl and cover are not correctly assembled,
the Food Processor will not operate. This is a safety feature.
6. Prepare your food and fill it in the processing bowl. If necessary
cut the food in proper size to fit through the feed chute (see ´Tips
for preparing the food`).
7. Note: For maximum control when using your food processor,
before turning on your food processor load the feed tube and fit
the food pusher on top.
Note: The food pusher consists of two parts: the food pusher and
an internal pusher with measuring scale (picture O).

shaft to adjust the

thickness of the slices

guiding pins

cannalure

lock

40965_designfoodprozessoradvanced_manual_english.qxp 29.01.2008 12:16 Seite 10