Storage, Troubleshooting – Gastroback 42909 Smart Ice Cream Advanced Automatic User Manual
Page 18

48
cleaning the paddle
1.
Wash the paddle with warm soapy water. Using the bottle brush supplied insert this in the
central part of the paddle to clean all the ice cream out.
2.
Let all surfaces dry thoroughly before reassembling the ice cream machine
note: Paddle and lid are dishwasher safe on the top rack ONLY.
Storage
1.
Ensure the ice cream machine is turned off. Remove power plug from the power outlet.
2.
Ensure the ice cream machine and all accessories are completely clean and dry.
3.
Place the ice cream bowl and paddle into the chamber.
4.
Ensure the lid is on.
5.
Store the appliance in an upright position and level on it support legs. Do not store
anything on top of the ice cream machine.
warnIng: Young children must be supervised that they do not play with the appliance
or any part of it. When the appliance is not in use, always switch off. Thereafter, unplug the
appliance.
Always clean the appliance and all its parts before storing to avoid accumulation of dried-on
food. Additionally, this way, you avoid that the kneading paddle sticks to the driving shaft.
(See: ›Care and Cleaning‹)
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight and in-
admissible strain (mechanical or electric shock, heat, moisture) and where it is out of reach
of young children. Do not place any hard or heavy objects on or in the appliance or any part of it.
Always handle power cords with special care. Electric cables may never be knotted, twisted,
pulled, strained, or squeezed.
trouBLeSHootIng
Problem
easy Solution
Ice cream won’t
freeze
• START | PAUSE button needs to be pressed.
• Alcohol in ice cream? Added too much or too soon.
• Ensure that there is adequate ventilation around the ice cream
maker. We recommend leaving at least 15cm between the ice cream
machine and adjacent hard surfaces.
Paddle won’t
move
• Paddle won’t move if the PRE-COOL function is selected for the first
5 minutes.
• Check to see if center spindle is inserted correctly into plastic padd-
le; if the center spindle is not moving then there mayb maybe an issue
with the machine - Call Gastroback customer service.
Lid will not lock
into position
• Paddle and bowl are not positioned properly – make sure the handle
of the bowl sits within the grooves and paddle is inserted properly.