Gastroback 42909 Smart Ice Cream Advanced Automatic User Manual

Page 11

To lock the lid into position, align the lid handle to the align-

ment graphic, rotating clockwise into the LOCK position. (pic C)

Press the POWER button to turn the machine on.

Rotate the hardness selection dial to your chosen dessert.

Press the START | PAUSE button to begin the churning process.

The elapsed time will be displayed on the LCD.
4.

The appliance will beep when your dessert has reached its desired consistency.

Pre-cooL

note: PRE-COOL can only be operated in the stand by mode, before pressing start cancel

button.
a)

PRE-COOL lowers the temperature of the ice cream machine to reduce the time it takes

to prepare your dessert. It is optional and is ideal to use while you are preparing your ice

cream base before churning.
b)

To select PRE-COOL function, press the PRE-COOL button. The light surrounding the button

will turn from white to red to indicate that the machine is in PRE-COOL mode.
This mode will PRE-COOL the machine to approximately -10°C to -30°C, taking about 5-10

minutes. READY will illuminate and PRESS START will flash on the LCD screen when the ice

cream maker has reached optimal temperature.
The paddle will start turning after 15 minutes has passed, but will not start making the frozen

dessert unless the START | PAUSE button is pressed.
In this function, the LCD screen will display the temperature, PRE-COOLING will illuminate

and the progress indicator will scroll, to let you know that you are in this mode.
c)

PRE-COOL will return to standby after 20 minutes or alternatively can be switched off

either by pressing PRE-COOL button again or pressing the START | PAUSE button which will

override the pre-cooling mode.
note: START | PAUSE button will have to be pressed to start the churning process after PRE-

COOLING.
note: Please note that PRE-COOL is not available after the START | PAUSE button is pressed.

The light surrounding the PRE-COOL button will turn off.