Trouble shooting – Gastroback 41000 Design Mixer Advanced User Manual
Page 21
![background image](/manuals/636684/21/background.png)
ATTENTION: Ensure not to damage the drive gear. Never poke with anything into
the motorblock. If necessary use a soft brush for cleaning. If any liquids run into the
motorblock clean and dry the motorblock very carefully.
3. Thoroughly dry the motor housing after each cleaning or leave it dry naturally where
it is out of reach of young children. Afterwards assemble the appliance.
Attendance: You do not need to oil the motor. Clean the units only as described
in the instructions.
WARNING: Return the entire appliance (including all parts and accessories) to an
authorised service centre for examination and repair.
Trouble shooting
The Design Mixer Advanced is reliable and robust and handling it with care it will
operate properly. For the case that problems show up you can solve the problems
on your own using the trouble shooting guide. WARNING: Only use the appliance
for the intended use. For attendance and repair take the appliance to an authorised
service centre.
Problem
Solution
Motor doesn’t start or blade
Check that the power plug is securely inserted into the power outlet and switched ´ON`
doesn’t rotate
Check that the blender jug and lid are securely locked into position.
Check that the ´POWER` button and selected function or speed setting is illuminated.
Be sure to press only one speed or function button at a time.
The motor stucks or slows down
Use a higher speed for processing. If necessary (because the blender jug is overloaded) pour
out part of the content of the blender jug. Chop hard ingredients such as nuts or chocolate
before putting them into the blender jug.
The motor stops or you can not
Turn the appliance ‚OFF‘, if the motor stops all of a sudden or stalls during operation
turn the motor on again
to avoid overheating. Go through following checking list:
The unit automatically shuts off after operating for 2 minutes. If you want to operate again,
unplug the appliance, wait 1 minute and plug in again.
Take the blender jug off the motorblock and clear out firmly bounded food that blocks the
blade using a spoon. Do not use force to avoid damaging the blade.
Chop hard ingredients such as nuts or chocolate before putting them into the blender jug.
If necessary (because the blender jug is overloaded) pour out part of the content of
the blender jug and try to restart the motor using a higher speed.
ATTENTION: Do not try to mix ingredients of very hard consistency or ingredients which
are too big in size to avoid overloading the motor. Do not overfill the blender jug.
Process very hard food in more then one go. The mixer is not intended for chopping
nuts with shell, bones or simular hard ingredients.
21