Gastroback 41000 Design Mixer Advanced - Manual (Page 17)

Directions for use
• The mixer proceeds fast and reliable when you add the ingredients one after the
other in small portions.
• The mixer processes within seconds. Avoid processing food longer then necessary.
• Always ensure the lid is closed before starting the motor to avoid spilling.
• You can add ingredients during the operation through the refill aperture. Never
place your face or hands over the opening.
• If the motor slows down use the next faster speed.
• Always clean the appliance right after use.
If ingredients get stucked on the walls of the blender jug turn the appliance off, take the
blender jug off the motorblock, open the lid and push the food down carefully using a
spatula. Take care of the blade.
ATTENTION: Open the refill aperture when mixing hot food and cover it with a
kitchen towel. This way excess pressure and steam can escape.
Production steps
WARNING: Ensure the blender jug is locked securely onto the motorblock
and that you can not knock the appliance over during operation to avoid
personal injury.
Connected the plug to the power outlet. Press the ´POWER` button on the far left of
the control panel to turn the blender on. The ´POWER` button will illuminate and flash.
1. If the appliance is properly assembled and securely locked onto the motorblock fill
the ingredients into the blender jug. Do not fill the blender jug above the ‘MAX’ line.
When the blender jug is filled at or near the ‘MAX’ line place one hand on the blender
lid to avoid displacement of the lid during operation.
IMPORTANT: Cooked food should cool down before processing. Food with hard texture
should be cut in pieces of 2 cm size before filling them into the blender jug. Fill liquids
in first. Do not overload the blender jug to avoid spilling or overloading the motor.
2. Place the lid on the blender jug and press the lid down to seal the top of the
blender jug. Close the opening of the lid with the refill lid.
NOTE: The refill lid has two small guiding pins that fit in the matching gaps of the lid. Twist
it clockwise 1/4 of a turn until firmly locked into position. You can hear it click when
the refill lid is in proper position.
NOTE: The blender features a patented assist lid. This allows the lid to fit tightly
onto the blender jug, avoiding displacement during operation. The ring pull design
allows the user to easily remove the lid with a simple leverage action.
WARNING: Never take the blender jug off the motorblock, the lid of the blender jug
17