Gastroback 41000 Design Mixer Advanced - Manual (Page 12)

3. Place the proper assembled blender jug onto the motorblock.
Turn the blender jug until it locks onto the motorblock. The handle
of the blender jug should be positioned to the right hand side of
the appliance in order to see the measuring scale (picture A).
The motor will not start before the plug is plugged into the power
outlet, the blender jug is securely locked onto the motorblock, the
appliance is switched ´On` (by pressing the ´POWER` button)
and a speed is selected.
4. Place the clear refill lid onto the opening of the blender lid.
NOTE: The refill lid has two small guiding pins that fit in the match-
ing gaps of the lid. Twist it clockwise 1/4 of a turn until firmly
locked into position (picture B). You can hear it click when the
refill lid is in proper position.
5. Load the blender jug with ingredients, pick a speed on the control
panel and start processing.
ATTENTION: Always ensure the motorblock is turned off when placing the blender jug
on the motorblock to avoid personal injury.
ATTENTION: Never try to sharpen the blade. Replace the blade if it is blunt. Please
contact our service department for the replacement part.
Operating
Before first use
WARNING: The blade is very sharp. Pay attention when handling the blade. Only touch
the blade on the blade assembly housing. Do not leave young children play with the
appliance or any part of it or the packing material.
After unpacking, remove all promotional and packing materials as well as any foreign objects.
Before first use and after a long period of storage, clean the appliance and all its units
with a damp soft cloth and warm soapy water (see ‘Care and Cleaning’). The blender
jug is dishwasher safe.
WARNING: The lid, refill lid and blade assembly housing are not dishwasher safe. Ensure
to remove the blade assembly housing and take the lid off the blender jug before placing
the blender jug into the dishwasher.
NOTE: When using your blender for the first time, you may notice an odour coming
from the motor. This is normal and will dissipate with use.
General Tips
Place the blender jug on a suitable, stable, dry, and clean working surface. (see:
‘Safeguards for Daily Operation’). Always wipe off spilled liquids immediately. Never
let any liquids run into the motorblock or underneath it to avoid electric shock. When
liquids are spilled on the motor housing, immediately unplug the appliance and dry
12
A
B