Technical specifications – Gastroback 41001 Design Mixer Advanced Electronic User Manual

Page 9

• Always handle the power cord with care. Do not pull or strain the power cord. The

power cord may never be knotted or squeezed. Do not let the power cord hang over the

edge of the table or counter. Take care not to entangle in the power cord. Do not touch the

appliance with wet hands to avoid risk of electric shock. Do not touch the appliance, if it is

damp or wet or is touching wet surfaces while connected to the mains power supply. In this

case, immediately unplug the appliance and dry the appliance (see ›Care and Cleaning‹).
• Ensure that the holder is leak-proof before putting the blender jug on the motorblock.

Always wipe off spilled liquids immediately. Do not immerse the motor or power cord in any

liquids or spill any liquids on it or place the motor on wet surfaces. Never let any liquids run

into the motorblock or underneath it to avoid electric shock. There are louvre underneath the

motorblock. Ensure that no water can run into the louvre. When liquids are spilled on the

motor housing, immediately unplug the appliance and dry the motor housing to avoid risk

of electric shock or fire. Do not attempt to operate the appliance, when liquids are on or

in the motor housing.

technIcAl specIfIcAtIons

Model:

Art. No. 41001 Design Mixer Advanced Electronic

Power supply:

230 - 240 V, 50 Hz

Power consumption:

1,200 W

Length of power cord: approx. 100 cm
Weight:

approx. 5.2 kg

Dimensions:

approx. 165 x 204 x 425 mm (diameter x depth x height)

Capacity, galss jug:

1.5 litre

Revolutions:

4,220 - 10,150 per minute

Certification: