Care and cleaning – Gastroback 41001 Design Mixer Advanced Electronic User Manual

Page 20

Turn the appliance off as soon as you are done with operating and take the blender jug

off the motorblock. You can pour out liquid foods.
IMportAnt: Do not leave any food dry on the surfaces of the appliance. Always clean

the appliance right after use (see: ›Care and Cleaning‹).

cAre AnD cleAnIng

wArnIng:

To avoid injury to persons and damage, always turn the appliance off, wait

for the motor to stop completely and unplug the appliance, immediately after operation and

before assembling/disassembling or cleaning the appliance.

wArnIng:

Ware oven gloves if processing hot food. Ensure not to get burned on spilled

over liquids or steam.
AttentIon: Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfect-

ants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this

could damage the surfaces. Always handle the entire appliance with care and without

violence.

cleaning the Blender Jug

Empty the blender jug and rise it with warm water.

Replace the blender jug on the motorblock and ensure it is securely locked into position.

Fill the blender jug with warm soapy water. The waterlevel should be high enough to

cover the blade with water but not too high to avoid run over liquids. Close the lid and turn

on the motor on ›5‹. Let the motor run for a few seconds.
4.

Turn the motor off, wait for the blade to stop moving and take the blender jug off the

motorblock.
5.

Pull the plug out of the power outlet.

Take the lid off the blender jug and pour out the water. Stubborn residues you can remove

using a nylon washing brush or sponge.

wArnIng:

Pay attention not to cut yourself cleaning around the blade or cleaning the

blade.
IMportAnt: The blender jug should be clean now. In case that there are stubborn resi-

dues on the blender jug or the blade, disassemble the blender jug and clean the single part

(see: ›Assembling and disassembling the appliance‹). Soak the parts in warm soapy water.
7.

Clean the lid and the refill lid with soapy water.

Rinse the blender jug, the lid, and the refill lid with clear water and dry the parts thor-

oughly and carefully with a cloth or leave all parts dry naturally where they are out of reach

of young children.
note: The blender jug is dishwasher safe.
note: The lid, refill lid and blade assembly housing are not dishwasher safe. Ensure to

remove the blade assembly housing and take the lid off the blender jug before placing the

blender jug into the dishwasher.