Gastroback 41001 Design Mixer Advanced Electronic User Manual

Page 6

• Do not leave any food dry on the surfaces of the appliance. Do not

immerse the motor

housing or power cord in water or any other liquid. Do not pour or drip any liquids on the

motor housing or power cord. When liquids are spilled on the motor housing, immediately

unplug the appliance and dry the motor housing to avoid risk of electric shock or fire. Do

not attempt to operate the appliance, when liquids are on or in the motor housing.
• Do not place the motorblock in an automatic dishwasher!
• To avoid damage, do not use any abrasive cleaners, corrosive chemicals (i.e. disinfect-

ants, bleach) or cleaning pads for operation or cleaning. Do not use any hard or sharp

utensils for operation or cleaning. Always handle the entire appliance and all parts of it with

care and without violence.
•

wArnIng:

The blades are very sharp. Pay attention when handling the blades. Only

touch the blades on the blade assembly and handle with care when cleaning.
• Do not use the appliance if it is damaged or parts of the appliance are damaged. Do

not use the appliance if it does not function properly or if it was excessively loaded. The

appliance is likely damaged if the appliance or parts of the appliance show cracks, exorbi-

tant wearing down, alterations or leaks. It is also likely damaged if the drive wheel of the

motorblock moves slowly. Take the appliance for technical maintenance and repair to an

authorised specialised reparation shop.
•

wArnIng:

Do not overfill the blender jug. If necessary, take some food out of the

blender jug, using a wooden or plastic spoon, before starting the appliance again.
• Do not chop extremely hard food, such as nuts with shell, bones to avoid overrunning,

spurt out or that the motor stalls or stucks during operation because the blade is blocked.
•

wArnIng:

Do not fill ingredients into the blender jug which exceed a temperature

of 60 degrees. After processing ice cubes slowly heat up the blender jug before processing

hot ingredients. Otherwise the blender jug will crack or get damaged. Use gloves process-

ing hot liquids and do not fill the blender jug up too high. Ensure not to burn yourself on

the blender jug, on overrunning, spurt out or hot steam. Touch the handle only for lifting the

blender jug.

• wArnIng:

To avoid injury to persons and damage, always turn the appliance off,

wait for the motor to stop completely and unplug the appliance, immediately after operation

and before assembling/disassembling or cleaning the appliance. Never use force opera-

ting, assembling or disassembling the appliance.

•

wArnIng:

The blades are very sharp. Pay attention when handling the blades. Only

touch the blade assembly housing when handling the blades. Handle with care when clean-

ing.
• note: Ensure the appliance is properly assembled and the blade is properly attached

before connecting the plug into the power outlet. Never turn the appliance on without the

lid or refill lid. Never turn the appliance on without the blender jug properly placed on the

motorblock. Never place only the holder or the blade only on the motorblock. Never touch

the drive gear when the plug is connected to the power outlet.

• wArnIng:

If the blade is mounted in the blender jug, the blender jug is positioned on

the motorblock, and the plug is connected to the power outlet, do not insert your fingers, a

wooden or plastic spoon or similar cooking utensils or foreign substances in the blender jug.

Always take the blender jug off the motorblock before pushing the food down with a spoon.