Gastroback 41001 Design Mixer Advanced Electronic - Manual (Page 18)

58
If ingredients get stuck on the walls of the blender jug turn the appliance off, take the blender
jug off the motorblock, open the lid and push the food down carefully using a spatula. Take
care of the blade.
AttentIon: Open the refill aperture when mixing hot food and cover it with a kitchen
towel. This way excess pressure and steam can escape.
operating
wArnIng:
ensure the blender jug is locked securely onto the motorblock
and that you can not knock the appliance over during operation to avoid
personal injury.
Connected the plug to the power outlet. Press the Power-button on the far left of the control
panel to turn the blender on. The Power-button will illuminate and flash. The LCD timer
screen will illuminate with ›00‹ displayed. The LCD timer screen shows the running time of
the motor.
1.
If the appliance is properly assembled and securely locked onto the motorblock fill the
ingredients into the blender jug. Do not fill the blender jug above the MAX line. When the
blender jug is filled at or near the MAX line place one hand on the blender lid to avoid
displacement of the lid during operation.
IMportAnt: Cooked food should cool down before processing. Food with hard texture
should be cut in pieces of 2 cm size before filling them into the blender jug. Fill liquids in
first. Do not overload the blender jug to avoid spilling or overloading the motor.
2.
Place the lid on the blender jug and press the lid down to seal the top of the blender jug.
Close the opening of the lid with the refill lid.
note: The refill lid has two small guiding pins that fit in the matching gaps of the lid. Twist
it clockwise ¼ of a turn until firmly locked into position. You can hear it click when the refill
lid is in proper position.
note: The blender features a patented assist lid. This allows the lid to fit tightly onto the
blender jug, avoiding displacement during operation. The ring pull design allows the user
to easily remove the lid with a simple leverage action.
wArnIng: Never take the blender jug off the motorblock, the lid of the blender jug or
place a spoon or other foreign substance into the blender jug while the motor is running.
Always turn the appliance off first and wait for the motor to stop moving. Now you can take
the blender jug off the motorblock remove the lid and check on the ingredients.
wArnIng: Do not fill ingredients into the blender jug which exceed a temperature of
60 degrees. After processing ice cubes slowly heat up the blender jug before processing
hot ingredients. Otherwise the blender jug will crack or gets damaged. Use gloves process-
ing hot liquids. Ensure not to burn yourself on the blender jug, overrunning, spurt out or hot
steam.
AttentIon: If you are working with hot ingredients first take off the refill lid and cover
the opening with a towel to release excess pressure and steam.
IMportAnt: Ensure the blender jug is properly locked on the motorblock and stands
securely. The appliance does not work if the blender jug is not in proper position on the
motorblock.