Cisco 340 User Manual

Page 53

5-53

Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows

OL-1394-08

Chapter 5 Configuring the Client Adapter

Setting Network Security Parameters

Figure 5-12 Wireless Network Properties Screen (Association Tab)

Step 4

Perform one of the following:

•

If you selected an SSID from the list of available networks, make sure the SSID appears in the
Network name (SSID) field.

•

If you clicked Add, enter the case-sensitive SSID of your profile in the Network name (SSID) field.

Step 5

Choose WPA from the Network Authentication drop-down list. This option enables your client adapter
to associate to access points using WPA.

Step 6

Choose TKIP from the Data encryption drop-down list.

Step 7

Go to the

section below to enable EAP authentication for

this profile.