Cisco 340 User Manual
Page 19
5-19
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-08
Chapter 5 Configuring the Client Adapter
Setting Advanced Ad Hoc Parameters
lists and describes the client adapter’s advanced ad hoc parameters. Follow the instructions in
the table to change any parameters.
Table 5-5
Advanced (Ad Hoc) Parameters
Parameter
Description
Antenna Mode (Receive)
Specifies the antenna that your client adapter uses to receive data.
•
PC card—The PC card’s integrated, permanently attached
antenna operates best when used in diversity mode. Diversity
mode allows the card to use the better signal from its two antenna
ports.
Options: Diversity (Both), Primary Antenna Only, Secondary
Antenna Only
Default: Diversity (Both)
•
LM card—The LM card is shipped without an antenna; however,
an antenna can be connected through the card’s external
connector. If a snap-on antenna is used, diversity mode is
recommended. Otherwise, choose the mode that corresponds to
the antenna port to which the antenna is connected.
Options: Diversity (Both), Primary Antenna Only, Secondary
Antenna Only
Default: Diversity (Both)
•
PCI card—The PCI card must use the Primary Antenna Only
option.
Default: Primary Antenna Only
•
Mini PCI card—The mini PCI card, which can be used with one
or two antennas, operates best in diversity mode. Diversity mode
allows the card to use the better signal from its two antenna
connectors.
Options: Diversity (Both), Primary Antenna Only, Secondary
Antenna Only
Default: Diversity (Both)
Note
This parameter is available only for 2.4-GHz client adapters.
Note
The Primary Antenna Only and Secondary Antenna Only
options were formerly named Right Antenna Only and Left
Antenna Only, respectively.
Antenna Mode (Transmit)
Specifies the antenna that your client adapter uses to transmit data.
See the Antenna Mode (Receive) parameter above for information on
the options available for your client adapter.
Note
This parameter is available only for 2.4-GHz client adapters.