ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 41)

5.0 Battery-Operated Field Probes
Before using your battery-operated probe, read the following:
HI-6053 Field Probe: Appendix B: Series H-491198-01 Battery
Charger on page 83.
HI-6022 and HI-6005 Field Probe: Appendix C: Series H-491198-48
Battery Charger on page 91.
HI-4422 Field Probe: Appendix D: Series H-491198-36 Battery
Charger on page 99.
To calibrate the probe prior to shipment, ETS-Lindgren also charges
the internal battery at the factory. Every effort is made to make sure
that the probe arrives ready to use, but you should verify the condition
of the battery prior to making any measurements.
The battery-operated probes utilize three orthogonal sensors to provide an
isotropic reading of the electric field. When requested, X, Y, Z, and total field data
can be reported, making the ETS-Lindgren battery-operated probes true 3-axis
probes.
Battery-Operated Field Probes | 41
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.