ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 114)

HI-6113 L ASER D ATA I NTERFACE C OMMANDS
LDI
Command
Description Probe Response
i Laser data interface
identification string
:i6113
• sr=10-character software
revision
• sn=8-character serial
number
n Read laser current :nx.xxx.
o Laser OFF command :o
The laser and all LEDs except
the green Power LED will turn
off
r Laser ON command :r
The blue Laser LED will
illuminate immediately, then the
yellow Receive LED will
illuminate a few seconds after,
indicating the probe is ready for
operation
The Laser ON command, r, should be the first command sent.
LDI
Command
Description Probe Response
tc Read temperature in
Centigrade
:txxxx.
tf Read temperature in
Fahrenheit
:txxxx.
114 | Operating Protocols
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.