ETS-Lindgren FP5000 Isotropic Electric Field Probe (Archived) - Manual (Page 32)

Isotropic Electric Field Probe
HI-4422/FP2000/FP4000/FP5000
© ETS-LINDGREN L.P. – July, 2005
Revision G- Part # H-600054
32
Command HI-4422/FP4000/FP5000/ Response
D2 (cont’d) b = battery status ("N"= safe operating
level, "W"= warning level, "F" = fail level).
aaa = axis enable ("E" = enabled, "D" =
disabled). Axis order is X, Y, Z.
t = terminating carriage return.
Rx Rx, where x is the range.
x = "" returns the range currently in use
x = 1, 2, 3, 4 enables the selected range
x = N sets the probe to the next (higher)
range.
TF Txxx, where xxx is temperature in E
Fahrenheit.
TC Txxx, where xxx is temperature in E
Centigrade.
Archived 4/2/10