ETS-Lindgren FP5000 Isotropic Electric Field Probe (Archived) - Manual (Page 27)

Isotropic Electric Field Probe
HI-4422/FP2000/FP4000/FP5000
© ETS-LINDGREN L.P. – July, 2005
Revision G- Part # H-600054 27
6.0 APPENDIX A: ERROR CODES
PROBE ERROR OUTPUT
If an error occurs, the probe will respond with one of the
following strings. These strings begin with a colon and end with
a carriage return.
Code Explanation
E1 Communication error (e.g., overflow)
E2 Buffer full error. Too many characters contained
between the Start Character/ Carriage Return
sequence
E3 The received command is not valid
E4 The received parameter is not valid
E5 Hardware error (e.g., EEPROM failure)
E6 Parity error
Archived 4/2/10