ETS-Lindgren 2187 Turntable - Manual (Page 31)

EC Declaration of Conformity | 31
Appendix C: EC Declaration of Conformity
The EC Declaration of Conformity is the method by which ETS-Lindgren, L.P. declares that the equipment listed
on this document complies with the EMC Directive (EEC/89/336) and Low Voltage Directive (EEC/73/23),
including applicable amending directives.
Factory Issued by
ETS-Lindgren, L.P. ETS-Lindgren, L.P.
1301 Arrow Point Drive 1301 Arrow Point Drive
Cedar Park, TX, USA 78613 Cedar Park, TX, USA 78613
The products listed below are eligible to bear the CE mark:
– Model 2187 Electric Powered Turntable, 2-Meter and 3-Meter with 2088 style motor base
A PPLICABLE R EQUIREMENTS
Standard Criteria
EN 55011 Group 1, Class B
EN 61000-4-2:1995 Level 2/3 (4/8 kV)
EN 61000-4-3:1997 Level 2 (3 V/m)
EN 61000-4-4 Level 2 (1/0.5 kV)
ENV 50204:1996 Level 2 (3 V/m)
EN 61000-4-5:1995 Level 3 (2/1 kV)
EN 61000-4-11:1994 2 kV
EN 61010-1 Safety requirements for electrical equipment for measurement,
control, and laboratory use
A UTHORIZED S IGNATORIES
The authorizing signatures on the EC Declaration of Conformity document authorize ETS-Lindgren, L.P. to affix the
CE mark to the indicated product. CE marks placed on these products will be distinct and visible. Other marks or
inscriptions liable to be confused with the CE mark will not be affixed to these products. ETS-Lindgren, L.P. has ensured
that appropriate documentation shall remain available on premises for inspection and validation purposes for a period of
no less than 10 years.