Dynojet Snowmobile Dynos: Installation Guide - Manual (Page 29)

Document # 98260100 3-11
Step 11
Reverse the procedure to remove the Driver
Carriage, and replace the suspension per
manufacturers instructions.
Warning: The Driver Carriage is designed for
dynamometer testing. Never attempt to
ride a snowmobile with the driver
carriage installed!
Warning: Never sit on the snowmobile when the
Driver Carriage is installed, you will
damage it!
Note: To maintain years of trouble free service,
clean the Driver Carriage at the end of
each day. Use “anti-seize” on the
channels to ensure smooth operation.