Dynojet Snowmobile Dynos: Installation Guide - Manual (Page 20)

3-2 Document # 98260100
Contents
(A) - Driver Carriage Frame
(B) - Front Mount Assembly
(C) - Rear Mount Assembly
Driver Carriage Set up
Step 1
The pins on the Driver Carriage frame should be
retracted when you receive it. Fit the Front
Carriage Mount to the front of the frame and
release the pins.
The Front Carriage Mount should be oriented so
that it can touch the stop.
The Front Carriage Mount should not be able to
swing out in front of the Carriage Frame!
A
B C
Front Carriage
Mount Stop