Dynojet 224: Pit Eddy Current Brake - Manual (Page 8)

Model 224 Pit Eddy Current Brake Installation and User Guide
C H A P T E R 1
Introduction
1-4
P ARTS L IST
The following table lists all of the parts included in the Eddy Current Brake
(P/N 72912002) Installation kit. Check your kit against the parts listed to make sure
you have received all of the parts. If any part is missing, contact Dynojet Technical
Support.
part number description quantity
21217200 Pit Cover Support 2
21217504 Hood Scoop 2
21217505 Hood Scoop, 20” 1
21626210 Z-Bracket (cable routing channel) 1
21917100 Foot 2
32355056 Bearing-Flange, 1.75”, 2-Bolt 1
32811195 O-Ring, 7/16 x 11/16”, #-205 1
35430899 Weight, 25 lb. 4
36560836 Screw, 1/4-20 x 1/2”, Bh-Flange 14
36561234 Screw, 1/4-20 x 3/4”, Bh-Flange 4
36580804 Screw-Set, 3/8-16 x 1/2”, W/Tlok 2
36581634 Bolt, 3/8-16 x 1”, Bh, Allen 25
36708100 Nut, 1/2-13, Nylock-Hex 2
36721100 Nut, 5/8-11 UNC, Hex 1
36801080 Bolt, 1/2-13 x 1.25”, Flange-Hex 4
36923100 Washer, 5/16”, Hardened, Flat, Stl 12
37513200 Anchor, Redhead, 3/8” 2
37518200 Installation Tool, Redhead Anchor 1
37620844 Woodruff Key, 1/2 x 2.75”, 1622-1 1
49950030 Temp Sensor, 30-500C Max 1
61118130 End Deck Assembly 1
61118131 Deck Assembly 1
61319001 Calibration Arm Assembly 1
62218130 Splined Shaft Assembly 1
62240130 Driveline Assembly, 7C, 224 Retarder 1
66411004 Theta-2 Controller - 240V -20A 1
65412004 PCB, Torque Cell Rev Switch, Loaded 1
66114002
or
66104001
Torque Module Sub-Assembly
or
Torque Module High Resolution Sub-Assembly
1
76950505 Torque Cell Assembly, 224 1
76950606 Cable, Input, 224 Torque Rev Sw 1
76950607 Cable, Output, 224 Torque Rev Sw 1
DM150-009-005 Nut, 1/4” 16
DM150-019-012 Bolt, 3/8-16 x 1”, Hex 10