Dave Smith Instruments MOPHO SE - Manual (Page 55)

49
Received NRPN Messages
Status Second Third Description
1011 nnnn 0110 0011 0vvvvvvv NRPN parameter number MSB CC
1011 nnnn 0110 0010 0vvvvvvv NRPN parameter number LSB CC
1011 nnnn 0000 0110 0vvvvvvv NRPN parameter value MSB CC
1011 nnnn 0010 0110 0vvvvvvv NRPN parameter value LSB CC
1011 nnnn 0110 0000 0xxxxxxx NRPN parameter value Increment
1011 nnnn 0110 0001 0xxxxxxx NRPN parameter value Decrement
1011 nnnn 0010 0101 0111111
RPN parameter number MSB CC - Reset NRPN
parameter number (when both MSB and LSB
received)
1011 nnnn 0010 0100 0111111 RPN parameter number LSB CC - Reset NRPN
parameter number (when both MSB and LSB
received)
Global Parameter Data
The following table shows the Global data that is sent and received on global
parameter dumps, and the corresponding NRPN number when sent/received
individually.
Param NRPN Range Description
0 384 0 - 24 Master Transpose; 0 = -12 semitones (1 octave), 12
= 0 (no transpose), and 24 = +12 semitones.
1 385 0 - 100 Master Fine Tune; 0 = -50 cents, 50 = 0 (centered),
100 = + 50 cents
2 386 0 - 16 MIDI Channel; if = 0, data received on all MIDI
channels. Otherwise = channel number 1 - 16.
3 388 0 - 3 MIDI clock select*
0 Use Internal clock, don’t send MIDI clock
1 Use Internal clock, send MIDI clock
2 Use MIDI clock In
3 Use MIDI clock In, and retransmit MIDI clock out
4 390 0 - 2 Parameter Send*:
0 NRPN
1 CC
2 Off
5 391 0 - 3 Parameter Receive†:
0 All
1 NRPN only
2 CC only
3 Off
6 394 0 - 1 MIDI Controller Send/Receive Off/On
7 395 0 - 1 MIDI Sysex Send/Receive Off/On