Dave Smith Instruments MOPHO SE - Manual (Page 13)

7
Modes of Operation
Mopho has three operating modes: program, edit, and global. In program mode,
Param 1, Param 2, and Inc/Dec are used to change from one saved program to
another. As soon as any of the programmable parameters are edited, that
parameter is displayed on the LCD, with the programmed value on the top line,
and the new, edited value on the bottom line. That is edit mode. To exit edit
mode and return to program mode, just press Program.
To enter global mode, briefly press and hold Program until the light goes off and
a global parameter is displayed on the LCD. Param 1 scrolls through the items in
the global menu and Param 2 and Inc/Dec change the values. For more
information, see Global Parameters on page 9.