Dave Smith Instruments MOPHO SE - Manual (Page 53)

47
Additional Continuous Controllers
(CCs) Transmitted/Received
The following table details how CCs are mapped onto Mopho’s controls. They
are transmitted when MIDI Parameter Send is set to CC in Global, and
recognized when received when MIDI Parameter Receive is set to either CC or
All in Global.
Parameter CC#
Osc 1 Frequency 20
Osc 1 Freq Fine 21
Osc 1 Shape 22
Glide 1 23
Osc 2 Frequency 24
Osc 2 Freq Fine 25
Osc 2 Shape 26
Glide 2 27
Osc Mix 28
Noise Level 29
Sub Oscillator 1 30
Sub Oscillator 2 31
Filter Frequency
102
Resonance 103
Filter Key Amt 104
Filter Audio Mod 105
Filter Env Amt 106
Filter Env Vel Amt 107
Filter Delay 108
Filter Attack 109
Filter Decay 110
Filter Sustain 111
Filter Release 112
VCA Level 113
Amp Env Amt 115
Amp Velocity Amt 116
Amp Delay 117
Amp Attack 118
Amp Decay 119
Amp Sustain 75
Amp Release 76
Parameter CC#
Env 3 Destination 85
Env 3 Amt 86
Env 3 Velocity Amt 87
Env 3 Delay 88
Env 3 Attack 89
Env 3 Decay 90
Env 3 Sustain 77
Env 3 Release 78
BPM
14
Clock Divide 15
NRPN Messages
The Non-Registered Parameter Number (NRPN) MIDI messages are used to
transmit and receive both global and program parameters. They are transmitted
when MIDI Parameter Send is set to NRPN in Global, and received when MIDI
Parameter Receive is set to either NRPN or All in Global.