Dave Smith Instruments MOPHO SE - Manual (Page 15)

9
Global Parameters
Mopho’s Global parameters affect all programs globally. Examples include
MIDI channel and fine tune. To edit the Global parameters, hold down the
Program switch until Global Parameter is displayed. The Param 1 knob changes
the global parameter and Param 2 knob and increment and decrement buttons
change the value.
Transpose: -12…+12— Master Transpose control, 0 is centered. Steps in
semitones.
Fine Tune: -50…+50— Master Fine Tune control; 0 centered. Steps in cents (50
cents = 1/2 semitone).
MIDI Channel: ALL, 1…16— Selects which MIDI channel to send and receive
data, 1 to 16. All receives on all 16 channels.
Clock: see table— Sets the clock status.
Display MIDI Clock Setting
Internal MIDI clock is neither sent nor received
MIDI Out MIDI clock is sent
MIDI In MIDI clock is received
Midi In/Out MIDI clock is received and transmitted
MIDI Parameter Send: NRPN, CC, Off—
Changes to the values of Mopho’s front
panel controls are transmitted via MIDI as Non-registered Parameter Number
(NRPN) controllers or as Continuous Controllers (CC). Transmission of
parameters can also be turned off. See MIDI Implementation on page 44 for
details.
Note: NRPNs are the preferred method of parameter transmission, since
they cover the complete range of all parameters, while CCs only handle
the main parameters.
MIDI Parameter Receive: All, NRPN, CC, Off— Sets the method by which
Mopho receives parameter changes via MIDI. As with transmission, NRPNs are
the preferred method, though some controllers may only be able to send CCs.
MIDI Control: Off, On— When On, the synth will respond to MIDI controllers,
including Pitch Wheel, Mod Wheel, Pedal, Breath, Volume, and Expression.
MIDI SysEx: Off, On—
When On, the synth will respond to received MIDI
SysEx messages, and will transmit them, when prompted, to the MIDI Out. See
Sysex Messages on page 58 for details.