Dave Smith Instruments PROPHET 12 DESKTOP - Manual (Page 58)

46 Multi Mode Operation Dave Smith Instruments
Multi Mode Operation
When Multi Mode is On, the Prophet 12 can be controlled by two separate MIDI
channels. In Multi Mode, Layer A will only play voices 1-6 and Layer B will
only play voices 7-12.
To Turn Multi Mode On:
1. Press g
loBal
.
2. Scroll down to 4. MIDI Multi Mode and turn it On. Note that the parameter
3. MIDI Channel changes to show the channels for the A and B layers.
3. Press g
loBal
again to exit the Global menu.
• For all Multi Modes Normal (stack/split OFF)/Split/Stack :
The front panel controls will send MIDI data on Layer A’s MIDI channel.
• Press the Edit Layer B button to activate Layer B .
The front panel controls will now send MIDI data on Layer B’s MIDI chan-
nel.
• Press and hold the Edit Layer B button to enter Link Edit Mode .
The front panel controls send MIDI data on both channels simultaneously.
• If Split A|B is active, the split point determines the MIDI note channel
assignment for Layer A and Layer B.
• If Stack A + B is active, MIDI data from the front panel controls is sent on
Layer A’s MIDI channel by default. Press Edit Layer B to send MIDI data
on Layer B’s channel.
Sending a program change message to either Layer A or Layer B’s MIDI channel
will load Layer A only of that program. To load Layer B of a given program to
either Layer A or Layer B, use MIDI CC 66 on each layer’s corresponding MIDI
channel.
Note: If the MIDI channel is set to ALL, Layer B’s MIDI channel will be set
to OFF. Choose a single MIDI channel to activate Layer B’s MIDI channel.