Dave Smith Instruments PROPHET 12 DESKTOP - Manual (Page 23)

11 Prophet 12 Module Operation Manual Global Settings
21 . Autotune Filters— Press Start Tuning (soft key 1) and follow the onscreen
instructions to tune the low- and high-pass filters.
Note: The filters are calibrated at the factory and under normal circum-
stances should not require re-calibration or re-tuning.
22 . Reset Globals— Sets the global parameters to the factory default settings.
23 . Dump Current Program— Transmits the current program in SysEx
format via the selected MIDI port. (See “9. MIDI Sysex Cable.”) Dumped
programs will load back into the same bank and program location in memory
when received by the Prophet 12 via MIDI.
24 . Dump Current Bank— Transmits the current bank in SysEx format via
the selected MIDI port. (See “9. MIDI Sysex Cable.”) Dumped banks will load
back into the same bank location in memory when received by the Prophet 12 via
MIDI.
25 . Dump All User Banks— Transmits all four User Banks in SysEx format
via the selected MIDI port. (See “9. MIDI Sysex Cable.”) Dumped banks will
load back into the same bank location in memory when received by the Prophet
12 via MIDI.