Dave Smith Instruments TEMPEST - Manual (Page 67)

57 Tempest Operation Manual Save/Load
To Export a Beat from RAM over MIDI:
1. Connect Tempest to the receiving device (computer running MIDI appli-
cation, dedicated hardware sequencer, etc.) using either USB or a MIDI
interface. If using a MIDI interface, connecting Tempest’s MIDI out to the
device’s MIDI in is sufficient for exporting.
2. In 16 B
eatS
mode, tap a pad to choose the Beat to export.
3. Press S
ave
/l
oad
, choose Export Beat in RAM over MIDI, and press the
n
eXt
Soft Key.
4. The current source Beat is displayed and can be changed, if desired.
5. Choose the destination (MIDI and/or USB).
6. Enable the receiving device to receive and record SysEx.
7. Press the e
XPoRt
n
ow
Soft Key.
8. The device records the SysEx data, which can then be named and saved for
backup and importing into Tempest.
9. Press the a
gain
Soft Key to export another file or S
ave
/l
oad
to exit.
To Export a Project from RAM over MIDI:
1. Connect Tempest to the receiving device (computer running MIDI appli-
cation, dedicated hardware sequencer, etc.) using either USB or a MIDI
interface. If using a MIDI interface, connecting Tempest’s MIDI out to the
device’s MIDI in is sufficient for exporting.
2. In 16 B
eatS
mode, press S
ave
/l
oad
, choose Export Project in RAM over
MIDI, and press the n
eXt
Soft Key.
3. Since there can only be one Project in RAM at a time, there is no source to
choose. Choose the destination (MIDI and/or USB).
4. Enable the receiving device to receive and record SysEx.
5. Press the e
XPoRt
n
ow
Soft Key.
6. The device records the SysEx data, which can then be named and saved for
backup and importing into Tempest.
7. Press the a
gain
Soft Key to export another file or S
ave
/l
oad
to exit.