Dataram DRI550D2 - Manual (Page 2)

MEMORY INSTALLATION
MEMORY INSTALLATION
Note: Refer to your system owner’s manual for detailed instructions.
Caution: System parts are sensitive to electrostatic discharge and can be
damaged by the static charge you may carry. You should wear a
grounded wrist strap.
IntelliStation POWER 285, p5 520/520Q (9131-52A), p5 505/505Q (9115-
505), p5 510/510Q (9110-51A)
Memory is installed in the following order:
•
The first pair is installed in J0A and J2A
• The second pair is installed in J0C and J2C
• The third pair is installed in J0B and J2B
• The fourth pair is installed in J0D and J2D
Remember that ordering and installing DIMMs in matched quads is preferred
with the first quad being J0A, J2A, J0C and J2C and the second quad being
J0B, J2B, J0D and J2D.
p5 550/550Q (9133-55A
Memory is installed on each processor card in the following order:
•
The first pair is installed in J0A and J2A
• The second pair is installed in J0C and J2C
• The third pair is installed in J0B and J2B
• The fourth pair is installed in J0D and J2D
Remember that ordering and installing DIMMs in matched quads is preferred
with the first quad being J0A, J2A, J0C and J2C and the second quad being
J0B, J2B, J0D and J2D.
It is also recommended that each processor card have an equal amount of
memory installed. Balancing memory across the cards improves performance.
MEMORY INSTALLATION MEMORY INSTALLATION
Note: Refer to your system owner’s manual for detailed instructions.
Caution: System parts are sensitive to electrostatic discharge and can be
damaged by the static charge you may carry. You should wear a
grounded wrist strap.
IntelliStation POWER 285, p5 520/520Q (9131-52A), p5 505/505Q (9115-
505), p5 510/510Q (9110-51A)
Memory is installed in the following order:
•
The first pair is installed in J0A and J2A
• The second pair is installed in J0C and J2C
• The third pair is installed in J0B and J2B
• The fourth pair is installed in J0D and J2D
Remember that ordering and installing DIMMs in matched quads is preferred
with the first quad being J0A, J2A, J0C and J2C and the second quad being
J0B, J2B, J0D and J2D.
p5 550/550Q (9133-55A
Memory is installed on each processor card in the following order:
•
The first pair is installed in J0A and J2A
• The second pair is installed in J0C and J2C
• The third pair is installed in J0B and J2B
• The fourth pair is installed in J0D and J2D
Remember that ordering and installing DIMMs in matched quads is preferred
with the first quad being J0A, J2A, J0C and J2C and the second quad being
J0B, J2B, J0D and J2D.
It is also recommended that each processor card have an equal amount of
memory installed. Balancing memory across the cards improves performance.