Dataram DRH2800I2 - Manual (Page 2)

DRH2800I2 Installation Manual
06664 C 2of 2
(continued from previous page)
Installing Dataram memory in the HP Integrity rx 2800 I2
• Shut down the system and remove the power cable(s). Remove system cover.
•
Remove the Dataram memory from the anti-static bag and place it on an antistatic mat.
•
Check the DIMM population rules noted above to make sure the system rules are not violated. You may refer
to your system manual for more details, or call Dataram Customer Support.
•
Ensure that the DIMM socket ejector tabs are open, line up the DIMMs with the connectors, and push the
DIMMs into place until the ejector tabs lock the DIMM in.
When you have installed all of the DIMMs, put the cover back on the system, plug the power cord(s) back in, and power
on the system. Check to see if all of the DIMMs are recognized at POST and by the operating system.
Dataram Customer Support
Dataram's Technical Support Program goes beyond the lifetime
warranty, routine calls and questions. As memory specialists since 1967,
we want to provide the most comprehensive level of service and support
in the industry.
Our Customer Support representatives can answer your questions and
give you information on system/memory configurations, upgrade options,
product specifications, compatibility and other technical topics or issues.
If a Dataram memory board does not function properly we will issue a
Return Material Authorization number (RMA#) for the return of the
defective module(s) and express ship a repair or replacement to you at
no charge.
In Europe:
+45 70 212 212 (Phone)
[email protected] (E-mail)
In the U.S.A. and all other countries:
800-599-0071 (Toll Free)
609-799-0071 (Phone)
609-799-6734 (FAX)
[email protected] (E-mail)
Caution: Refer to your system owner’s manual for detailed
instructions. System parts are sensitive to electrostatic
discharge and can be damaged by the static charge
you may carry. You should wear a grounded wrist strap.