CDI Torque SURETEST Torque Calibration System - Manual (Page 40)

TORQUE CALIBRATION SYSTEM SETUP CHAPTER 4
4-1
Printing Statistical Analysis
1.
Press Data , then Press Format.
2. Press SEND to display the Print out menu.
Use Down key to select Send Statistics then press Enter to Print.
3. Press Escape to return to measurements mode.
SPC PRINT-OUT
_____________________
SPC listing
_____________________
PART NO.
_____________________
NAME
_____________________
STATISTICAL ANALYSIS
Time : 16/Nov/1998 14:23
** LIMIT DATA **
Set High: 254.85 in-lb
Set Low : 251.55 in-lb
0001 254.45 in-lb
0002 253.91 in-lb
H0003 254.89 in-lb
0004 252.89 in-lb
0005 253.42 in-lb
0006 253.31 in-lb
0007 252.40 in-lb
0008 252.49 in-lb
0009 252.61 in-lb
L0010 251.49 in-lb