CDI Torque SURETEST Torque Calibration System - Manual (Page 17)

FUNCTIONAL DESCRIPTIONS AND SPECIFICATIONS CHAPTER 2
6. Edit Limits
Sets up high torque limit preset. (->) to go Down 1 line.
Sets up low torque limit preset. (<-) to go Up 1 line.
Use Up or Down cursor key to increment or decrement the respective value.
Use Left or Right cursor key to select digit.
Press ‘Save’ to activate the change. Press ‘Clear” to Clear All Limit set-up.
Press ‘Escape’ to Exit. Last setup is retained.
7. Clock Adjust
Edits DATE/TIME programming function.
To adjust the Clock, use LEFT or RIGHT cursor key to get to Day, Month, Year, Hour,
Minute, or Second field. Then use UP or DOWN cursor key to increment or decrement
the respective value.
Press and hold the cursor key to change the value quickly.
Press ‘ENTER’ to activate the change.
8. Calibration
This enables the User to perform calibration of the SURETEST. The procedures for both the
single and 4-in-1 transducers are in Chapter 5.