Catler RC 4010 - Manual (Page 6)

4
CATLER RECOMMENDS SAFETY FIRST
USE ONLY THE ACCESSORIES SUPPLIED OR INTENDED TO BE USED
WITH THIS APPLIANCE.
DO NOT USE THIS APPLIANCE WITH PROGRAMMER, TIMER OR ANY
OTHER APPLIANCE THAT IS ENABLE TO SWITCH ON THE APPLIANCE
AUTOMATICALLY.
• The temperature of accessible surfaces
will be high when the multi cooker is
operating and for some time after use
• Do not place anything, other than the
lid, on top of the multi cooker when
assembled, when in use and when stored.
• Always insert the connector end of the
power cord into the appliance inlet
before inserting power plug into the
power outlet and switching on appliance.
Ensure the appliance inlet is completely
dry before inserting the connector end of
the power cord.
• To prevent scratching the non-stick
surface of the removable cooking bowl,
always use wooded or plastic utensils.
• Always position steam vent on lid away
from yourself to avoid scalding from
escaping steam.
• Ensure the removable cooking bowl is
correctly positioned in the multi cooker
base before you commence cooking.
• The appliance connector must be
removed before the multi cooker is
cleaned and that the appliance inlet must
be dried before the multi cooker is used
again.
• To prevent damage to the multi cooker
do not use alkaline cleaning agents
when cleaning, use a soft cloth and mild
detergent.
• Always have the glass lid placed
correctly into position on the appliance
throughout operation of the appliance
unless states in the recipe to have it
removed.
• The glass lid has been specially treated to
make it stronger, more durable and safer
than ordinary glass, however it is not
unbreakable. If struck extremely hard, it
may break or weaken, and could at a later
time shatter into many small pieces
without apparent cause.