Catler FP 8010 - Manual (Page 9)

8
KNOW YOUR FOOD PROCESSOR FP 8010
A. Small food pusher
for improved processing control of smaller
ingredients. It also doubles as a measuring
cup for adding/measuring ingredients. The
food processor will run continually whether
the small pusher is in or out.
B. Large food pusher
for pushing food down the feed chute.
The food processor will not start unless the
large pusher is in place correctly.
C. Extra wide feed chute
for larger ingredients.
D. Processing lid
locks onto the processing bowl.
E. PULSE button
press down and hold briefl y for short bursts
of power. The motor will automatically stop
after the pulse button has been released.
F. POWER/OFF button
provides power to the food processor unit
only. Start/Pause is required to be pressed
to start operating the food processor.
G. Feed chute safety system
prevents the motor from operating unless
the bowl and lid are correctly locked in
position, and large feed pusher is inserted.
H. Silicone seal
reduces the chance of leakage while
processing large volumes of liquid
ingredients.
I. Processing bowl with handle
15 cup bowl for dry ingredients and 10 cups for
liquid (thick, wet ingredients e.g. soups). The
processing bowl locks onto the motor base.
J. Count up & count down timer
used to set desired time required for
processing. Can count up or down, stopping
the processor once the time is reached in
count down mode.
K. LCD display
displays the timing function.
L. Direct drive motor base
2000W induction motor with safety braking
system.
M. Non-skid rubber feet
or added safety and stability.
N. Julienne Disc
use this disc for julienning vegetables.
O. Chip Cutter
use this disc for chipping vegetables.
P. Reversible Shredder
use one side for small/thin shredding and
the other side for coarse shredding.
Q. Adjustable Slicer
use this disc for slicing ingredients. Able to
slice from 0.5mm – 8mm thick.
R. Whisk/Emulsifying Disc
use this attachment for whisking of eggs
and cream.
S. QUAD ® Processing Blade
swift action for chopping, mixing, whipping
and blending a variety of ingredients.
T Dough Blade
blunt blade designed for a softer action
of combining dough ingredients.
U. Mini Processing Blade
used for chopping, mixing, and blending
a variety of ingredients.
V. Disc Spindle
fi ts onto bowl drive coupling and is used to
hold the reversible shredder, julienne, chip
cutting, whisk and adjustable slicing discs in
position.
W. Storage Container with lid
used for storing all discs and blades when
they are not in use.
NOT SHOWN
Cleaning Brush
for cleaning the processor bowl, blades and
discs. The fl at end is designed as a scraper to
remove food particles from crevices.
Plastic Spatula
for scraping the sides of the bowl helping to
process ingredients evenly.
Mini Processing bowl
for processing small volumes of ingredients.
Cord Storage
cord can be pushed into the housing to reduce
length.
Catler Assist Plug
ergonomic ring-pull design allows the power
plug to be easily removed from the power
outlet.