Salter Brecknell SBI-505 - Manual (Page 6)

4
Tare operation
During “TARE” operation when gross weight is tared the indicator will
show the Net weight. The “Net” “tared” status light is on. In tare mode,
Press” TARE” key to clear the tare weight and the indicator will show the
gross weight.
Accumulation operation
With Zero on the Display load weight, Press goes to
accumulation mode, ”Total” light is on, display” n 001”, and then the display
goes back to the loaded weight; unload the weight , Display shows zero, load
the second weight again. Press display”n002” then display the
second loaded weight. Repeat it again and again for a maximum 999 times.
Check the accumulation
Press “TOTAL “key and hold it then press “ON/OFF” key, display ”n**”, (it is
the accumulating times) then show total weight. If the total weight is beyond
the display capability, It will show the first 4 digits then the last 4 digits. For
example, the first 4 digits is”0012”, the last 4 digits is”34,56” It means the
actual weight is “1234.56”
EXIT the accumulation function
When the indicator show the last 4 digits, Press hold it, the
indicator show “ clr n”, it means don’t clear the total Weight, Press “PRINT”
key to exit it; if you want to clear total weight Press “ZERO” or “TARE” key,
“clrn” change to “clry” it means clear total weight? Then Press “PRINT” to
clear the total weight and exit accumulating mode.