Salter Brecknell SBI-505 - Manual (Page 21)

19
ERR3
During calibration, the
input signal is
negative 1. check the connection is
correct
2. check load cell
ERR4
During calibration, the
signal is unstable After the platform is stable, start
calibration
ERR5 Change PCB
Default parameters
Parameter instruction Default
C01 Calibration 1
C02 Decimal digits 0
C03 Resolution 1
C04 Max. capacity 10000
C05 Empty calibration 0
C06 Capacity calibration 0
C07 Restore default 0
C08 Warning tone 1
C09 Power-off automatically 0
C10 Power saving mode 0
C11 Hold function 0
C12 Prohibit kg/lb conversion
１
C13 Upper limit alarm 000000
C14 Under limit alarm 000000
C15 Inner code