Salter Brecknell 308BP User Manual

Page 25

xxv

B.2.3 RECOGNIZED HOST COMMANDS

“P”

- This command is sent to the scale to print the indicated display. The scale will not

respond if the scale is in motion, positive overload or negative overload.

“Z”

- This command is sent to the scale to zero the scale. The scale will not respond if the

scale is in motion, positive overload or negative overload.

“M”

- This command is sent to the scale to add an entry to the accumulator (M+).

“R”

- This command is sent to the scale to recall the contents of the accumulator (MR).

“C”

- This command is sent to the scale to clear the contents of the accumulator (MC).

“U”

- This command is sent to the scale to toggle among the configured units.