AVer SF2121H Series - Manual (Page 28)

28
- Alarm Interval
This triggers the IP camera based on the set time.
- Motion Detection Region 1/2/3
This triggers the IP camera when a motion is detected on the motion detection region.
- Digital Input
This triggers the IP camera when the external digital input device or sensor is
activated.
- SD Card / microSD Card
This triggers the IP camera when the SD/microSD card is removed.
- Network
This triggers the IP camera when the Internet connection got disconnected.
7. Select the type of response for the IP camera to perform when a trigger is activated. Set
the duration. Choose digital output to send recorded video or still image, or Alarm Audio
to sound the alarm. Then select the type of server/media to where to send the file. To
configure the FTP and NAS setting, go to System > Network > Server tab.

Snapshot and System log support sending the file thru Mail, and storing in FTP, NAS
or SD/microSD card. You can enable multiple options to send and save the captured
image.
8. Video Clip supports storing in FTP, NAS or SD/microSD card. You can only select one
storage option to save the video file. For better performance, we recommend setting the
video stream is default value. Click OK to add the event setting, Delete to remove, and
Cancel to void and close the event setting.