AVer SF2121H Series - Manual (Page 26)

26
3 to add more preset locations.
4. Select the preset target area in the list and press to create the patrol sequence. The
selected present target area will be listed in the Patrol Locations.
5. Set the dwelling time for how long you want to stay in the preset target area. Double-
click and enter the time. Then click OK or press enter to apply the changes.
6. Click to delete the selected preset location in the Portal Locations list and to
arrange the patrol order.
7. Click Save to implement the preset patrol setting.
Ev e n t
Both admin and operator levels can configure the Event setting. In this section, the IP
camera can be configured to perform an action when an event is triggered at the specified
time.