AVer SF2121H Series - Manual (Page 10)

10
Name Function
To Add Filter
1. Click Add Filter in User Management > Connection tab.
2. In Rule drop down list, select from the 3 types of rules:
Single, Network and Range.
Single
– add an IP address
Network
– assign a network address and the
corresponding subnet mask to be filtered.
Range – assign a range of IP address to be filtered.
3. Save to add the created data in the filter list or Cancel to
void the operation and exit.
(6) IPv6 Filter Please follow the IPv4 filter rules to set up IPv6 filter.
S y s t e m > N e t w o r k
In this section, only admin level is authorized to set up the Network settings.
S y s t e m > N e t w o r k > S e t t i n g
In Setting tab, you can configure the type of network connection for IP camera and assign
name for the IP camera. Depending on the network connection, IP camera can be
accessed from the computer within the same local area network (LAN) or anywhere with
Internet connection. After completing the setting, click Save to apply the new setting and
Cancel to keep the old setting.