AVer SF2121H Series - Manual (Page 11)

11
*(2)
(3)
(4)
(1)
Name Function
(1) Device Name Assign name for the IP camera.
(2) Network HW Switch Enable/disable to use the IP camera dip switch network setting.
If this is enabled, make sure the dip switch behind the IP
camera is set properly.
* ( Available for FX series and SF2121H-R Box type only )
(3) Network Type Select the type of IP camera Network connection.
DHCP
– select this option to automatically obtain an IP address
from the DHCP server, whenever the IP camera is connected to
the network. You can use the IP camera UPnP Discovery
software in the CD to easily setup the IP camera network.
Static IP – select this option to manually assign a fix IP address
to the IP camera.
PPPoE – select this option to access the IP camera anywhere
with Internet connection. To use this option, this requires an
account provided by the ISP. Set this setting while connected to
the LAN and click save. Connect the IP camera directly to DSL
or cable modem.