ภาษ าไทย, English 繁體中文 简体中文 日本語, Osd menu description – AVer CP355 user manual User Manual
Page 23

English
繁體中文
简体中文
日本語
ภาษ
าไทย
OSD Menu
Description
MODE
TEXT
GRAPHICS
HIGH FRAME
WIDE ANGLE
MICROSCOPE
MACRO
INFINITY
get close-up view from the subject in the range of 5 to
20cm.
Infinite - set to view the subject far away from the
camera in the range of 55cm and beyond.
EFFECT
COLOR
B / W
NEGATIVE
IMAGE > EFFECT
Use ▲or▼ to select and display the image in Camera
mode into positive (true color), monochrome (black
and white) or negative. Then press ENTER to make a
selection.
MENU
MODE
EFFECT
REVERSE
MIRROR
MANUAL FOCUS
EXPOSURE
WHITE BALANCE
CAPTURE
NIGHT VIEW
GRAPHICS
COLOR
OFF
OFF
AUTO
AUTO
AUTO
SINGLE (06/80)
OFF
IMAGE
SETTING
IMAGE > REVERSE
Press ENTER to turn off/on REVERSE. Reverse
rotates the image by 180° in Camera mode.
MENU
MODE
EFFECT
REVERSE
MIRROR
MANUAL FOCUS
EXPOSURE
WHITE BALANCE
CAPTURE
NIGHT VIEW
GRAPHICS
COLOR
OFF
OFF
AUTO
AUTO
AUTO
SINGLE (06/80)
OFF
IMAGE
SETTING
IMAGE > MIRROR
Press ENTER to turn off/on MIRROR. Mirror flips the
image in Camera mode.
MANUAL FOCUS
FAR
NEAR
IMAGE > MANUAL FOCUS
Use ◄or► to manually adjust the focus and then
press ENTER to save the setting and exit.
EXPOSURE
AUTO
MANUAL
IMAGE > EXPOSURE
Use ▲or▼ to select between AUTO or MANUAL.
Then press ENTER to make a selection.
AUTO to automatically adjust the camera exposure to
determine how much light is required.
MANUAL to manually adjust the exposure level.
Press ENTER and the bar will turn red, use ◄ & ► to
increase and decrease the exposure level, and then
press ENTER to save the setting and the bar will turn
white. Press MENU to close the menu.
EXPOSURE
AUTO
MANUAL
54
32
0
WHITE BALANCE
AUTO
RED
BLUE
IMAGE > WHITE BALANCE
Use ▲or▼ to select between auto or manually adjust
the red and blue color to suit the lighting condition or
color temperature. Then press ENTER to make a
selection.
To manually adjust the red or blue color level, select
RED or BLUE, press ENTER and the bar will turn
red, use ◄ & ► to increase and decrease the level,
and then press ENTER to save the setting and the
19