Alumax P-DRC1Y - Manual (Page 14)

14
DOOR PANEL PLACEMENT
Install the set of double rollers (5) to the
bottom holes of the door panel (6), making
sure that they are tangent to the running
rail (1) by way of the nonconcentric washers.
9 BOTTOM ROLLERS INSTALLATION
8
GLASS HOLE
5 1
WASHER
PARALLEL
5
7
12
6
8A
8B
Install door panel (6), ensuring that the
rollers (5) are positioned over the running
rail (1). Through the use of the
nonconcentric washers, adjust rollers so
that the sliding door panel (6) is as parallel to
the wall as possible.
Ensure that the door panel (6) is placed
within the bottom center guide (12). If the
bottom of the door panel and the guide
create rubbing, adjust the excentric rollers to
Position 1 of Step 7.
6
1
6