Ganoti, Specifications, Aotoaidj – Canon 7S User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GanoTi
AOTOaiDj
The Canon Auto Slide Projector 500 EF is a unique projector of Canon’s precision optical
and electronics technologies.
An electronic focusing device incorporated in the Canon Auto Slide Projector 500 EF to
automatically adjust focusing on the screen, makes it possible to project slides without
manual adjustment, once the focus has been established.
The Canon Auto Slide Projector 500 EF comes with a complete and wide range of accessories,
including
5
interchangeable
lenses
to
suit
different
projection
conditions:
fully
automatic
remote control system: two automatic strip film carriers for 35 mm full-size and half-size
frames: and a tape synchronizer for sound projection. It is ideally suited for audio-visual
education and for occupational training and informational activities.
Specifications:
Slide Size: 35 mm (24 X 36 mm, 24X18 mm) mount and strip film, and
26X26 mm mount film.
Acceptable
Mounts:
Paper,
plastic
and
metal
mounts,
and
glass
of
less
than 3.2 mm in thickness.
Slide Magazine: Magazine 50 can carry 50 slides.
Slide
Operation:
Powered
forward
and
reverse
operation
by
the
use
of
mount
film/magazine.
Projection
time may be set at any interval between
five and twenty seconds (indices: 5, 10, 15 and 20). A single slide can be
projected.
Slides
can
be
removed
from
the
projector.
Powered
forward
operation by use of strip film/strip film carrier.
Projection Lens: P 50 mm F 3.5, 8 elements in 8 components.
P 75 mm F 3.5, using rear component of P 50 mm.
P 100 mm F 2.8,
4 elements in 4 components.
P 150 mm F 3.5,
3 elements in 3 components.
P 200 mm F 3.5,
5 elements in 4 components.
P 90—150 mm F
3.5 zoom, 9 elements in 7 components.
Condenser Lens: 3 elements in 3 components (one is convertible) including
a heat-resistance filter. For 50 mm and 75 mm lenses, and for 100 mm,
150 mm, 200 mm and zoom lenses.
Projection Lamp: 115 V / 220 V, 500 W.
Focusing Adjustment: Automatic adjustment of film deviation at the time of
projection
by
the
use
of
aperture
unit
incorporating
electronic
focusing
system.
Motor: Two shading coil-type motors for operation and cooling.
Biower:
Reinforced
cooling
system
that
allows
continuous
projection
for
an
extended
period. It keeps
the temperature of
projector under 70° C,
and film, under 50° C.
Room lamp: For local lighting, equipped with a socket. Up to 115 V / 220 V,
100 W.
Sound
Projection:
Possible
to
synchronize
the
projection
with
a
tape
recorder
by
using
the
Tapesync
AS.
Slide
transmitting
by
pulse
signals.
Power Source: 115 V / 220 V, 50-60 Hz.
Power Consumption: 600 W.
Size: 360 X 325X155 mm with cover.
Weight: Approx, 8.6 kg.
Accessories:
Six
types
of
convertible
lenses.
Remote
Control
Switch
AS
(cord length, 4 m). Extension Cord AS (10 m), AC Cord Tapesync AS,
Slide Magazine 50 (set of 2 and 4), Strip Film Carrier ASF (for full size
film) and ASH (for half-size film). Projection Lamp.
Subject to alterations.
23