Silencing the beeper, Move the <►> arrow to the <*0)> icon, Set the setting to “ 0 – Canon EOS 3000 N User Manual

Page 57

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

0 Multiple Exposures / Silencing the Beeper

® If you shoot multiple exposures on the first few or last few frames of roll, the

multiple exposures might not be precisely aligned due to the film advance
mechanism’s characteristics.

ul » During multiple-exposure shooting, the < ^ > arrow next to the <0> icon on

the LCD panel will blink.

■> To cancel multiple exposures before shooting, set the number of multiple

exposures to 1.

* To cancel multiple exposures after shooting, follow steps

and

to set the

number of multiple exposures to blank.

Since shooting multiple exposures will expose the same frame multiple times,
negative exposure compensation (-^page 52) must first be set to avoid
overexposure.

General Guide for Exposure Compensation

Multiple Exposures

2 exposures

3 exposures

4 exposures

Exposure Compensation Amount

-1.0 stop

-1.5 stop

-2.0 stop

These are only suggested exposure compensation amounts. The optimum

amount depends on the scene. Experiment to find the optimum compensation
amount.

■»)) Silencing the Beeper

The beeper can be silenced in all cf the sheeting medes.

Move the <►> arrow to the <*0)>
icon.

• Lcck at the LCD panel and press the

butten. ((2)6)

Set the setting to “

® Turn the

dial.

» Tc enable the beeper tc scund, set tc

i i I ’’

* Press the shutter butten halfway tc

return tc ncrmal camera cperaticn.