Unloading film, 0^ midroli rewind – Canon EOS 3000 N User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
©Loading and Unloading Film
© ® In hot and humid environments, do not remove the film packaging until you are
ready to load the film
® The shutter curtains have been manufactured at very high precision. Never
touch them with your fingers. When loading film, do not touch or damage the
curtains with your fingers or film.
Q ® if the film is not loaded properly, the <©> icon will blink on the LCD panel and
the shutter will not work. Reload the film cartridge properly, (-^page 20)
* If the film is not DX-coded, set the ISO speed manually, (-»page 58)
“ Infrared film cannot be used with this camera.
Unloading Film
After the film’s last frame is exposed, the camera rewinds the film automatically.
After the film’s last frame is exposed, the
camera rewinds the film automatically.
There will be a shutter-release sound
and then only the <@> icon will be
displayed on the LCD panel. Make sure
this icon is displayed, then open the
camera back and unload the film.
0^ Midroli Rewind
To rewind the film in midroll, follow the procedure below.
Turn the Command Dial to
Press and hold down the <
button for at least 1 second.
^ The film will start rewinding. When
the film rewind ends, there will be a
shutter-release sound.
Open the camera back and
remove the film.
2 1