Check the viewfinder display and take the picture – Canon EOS 3000 N User Manual

Page 47

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Av Aperture-Priority AE

iC - ]

Press the shutter button halfway

to focus the subject.

► The shutter speed is set

automatically.

Check the viewfinder display and

take the picture.

® If the shutter speed display does not

blink, a correct exposure will be

obtained.

If the slowest shutter speed blinks, it

indicates underexposure. In such a case,

turn the

dial to set a larger

aperture (smaller f-number) until the
shutter speed display stops blinking.

If the maximum shutter speed blinks, it

indicates overexposure. In such a case,

turn the

dial to set a smaller

aperture (larger f-number) until the shutter

speed display stops blinking.

ii Aperture Display

The aperture can be set and displayed in full and half stops as shown below.

The larger the number, the smaller the aperture opening will be. The displayable

range of apertures depends on the lens mounted on the camera.

< n

i.U

i o

(.0

J n

c . u

¿5

/.S'

5.1

8.G

3.5

/ /

/3 IS

if no lens is mounted.on the camera, “OD

setting.

5.5

8.8

3.5

H.D S.5

will be displayed for the aperture