Select the date or time display, Select the digit to be set, Set the correct number – Canon EOS 3000 N User Manual
Page 36: Finalize the setting, Remove the battery compartment cover, Insert a new battery, Setting the date and time, Date back’s battery, Replacing, Quartz
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Imprinting the Date or Time (QD Model only)
Setting the Date and Time
To set the date or time, follow the procedure below.
Select the date or time display.
® Press the
Select the digit to be set.
• Press the
digit blinks.
Set the correct number.
• Keep pressing the
until the correct number appears.
Finalize the setting.
• Keep pressing the
until no digits blink.
Replacing
the
Quartz
Date Back’s Battery
When the date/time on the imprinted photograph looks faded, replace the
CR2025 lithium battery as follows. Battery life is about 3 years.
Remove the battery compartment cover.
• Open the camera back and loosen
the screw as shown in the illustration.
Take out the battery.
Insert a new battery.
* The battery’s positive contact (+)
must face up.
Reattach the battery compartment cover.
® Set the correct date and time.