Canon AT 1 User Manual

Page 86

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Cancelling the Self-Timer Operation

If you should want to cancel the self-

timer operation after having pressed the

shutter button, set the main switch to OFF on

the top side of the camera. Then, the self-
timer lamp stops blinking and the self-timer
operation will be cancelled. If the main switch

is not set to OFF and the self-timer lever

is returned to its original position, the shutter

will be released.

Adapter A for Tripod

When using a lens of considerable overall

length, depending on the tripod being used, it
may be difficult to hold the adjustment in the

case of accidental bumping of the lens. In
such cases, the rubber Adapter A for Tripod

may be placed between the tripod head

and the camera.