Canon AT 1 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PRELIMINARY PREPARATION

Neckstrap and Case

Slide the scratch prevention ring and

spare battery case which houses a spare

battery onto the Canon AT-1 's neckstrap,

then thread the neckstrap through the rings.
Adjust the neckstrap to a length most suitable

for you.

Firmly attach the case to the camera by

turning the screw on the bottom of the case.
When you wish to take off the top cover of
the soft case, turn the top cover to the

bottom then slide it straight up in the direc

tion of the arrow and pull it out as indicated

in the photo.