Exposure metering with fl lenses – Canon AT 1 User Manual

Page 62

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Exposure Metering With FL Lenses

When Canon FL lenses are used on the

AT-1, it is necessary to take a stopped-down

meter reading. After pressing in the stopped-

down lever until it locks, adjust the aperture
ring and/or shutter speed dial until the meter

needle inside the viewfinder is aligned with

the aperture needle to obtain the correct

exposure.

After

determining

the

correct

exposure, release the stopped-down lever and

compose and focus at maximum aperture.